The letters are reflective, Iron On Material The silver/gray color is Certified EN471, Class II for safety applications. The font is Arial. 11 (1.5" high) letters/characters, will fit in a 12 inch long space, like on the back of a shirt. Can be applied to Cotton, acrylic, polyester and similar fibers. Application Directions: Heat at 300 - 360 degrees for 15 - 20 seconds, medium pressure. Peel cold. Wash Instructions: Temperatures up to 180F degrees inside out.
The iron on letters above were ironed on a sweatshirt. The letters in "COMMANDER" are 1.5" high.
The picture above was taken with a flash camera. The above iron on is the silver/gray color. The iron on below is the bright yellow. Without flash above and with flash below.
The iron on below is the white without the flash.
The iron on below is the white with the flash.
On a polyester safety vest.
1.5" letters high cost $1.29 per letter. Domestic USPS 1st Class Shipping costs are included in the above priceMake selection using the drop down windows below and put the letters/words/characters in the monogram window exactly how you would like it.(if monogram is all Capital letters or lower case letters, that is what will be cut and sent)